标准编号

标准中文名称

标准英文名称

SY/T5215-87

钻具止回阀

GB/T12235-1989

通用阀门法兰连接钢制截止阀和升降式止回阀

General purpose industrial valves—Flanged steel globe valves and lift check valves

GB/T1241-1983

船用外螺纹锻钢截止止回阀

Marine forged steel male thread stop and check valves

GB/T12233-1989

通用阀门铁制截止阀与升降式止回阀

General purpose industrial valves—Casting iron globe valves and lift check valves

GB/T12236-1989

通用阀门钢制旋启式止回阀

General purpose industrial valves—Steel swing check valves

GB/T13932-1992

通用阀门铁制旋启式止回阀

General purpose industrial valves--Cast iron swing check valves

GB/T18691-2002

农业灌溉设备止回阀

Agricultural irrigation equipment--Check valves

GB/T1952-1980

船用低压外螺纹青铜止回阀

Low bressure bronze male screw-thread check valve for marine use

GB/T597-1983

船用外螺纹青铜止回阀

Marine bronze male thread lift check valves

GB/T592-1993

船用法兰铸铁止回阀

Marine cast iron flanged lift check valves

GB/T591-1993

船用法兰铸铁截止止回阀

Marine cast iron flanged stop check valves

GB/T586-1999

船用法兰铸钢止回阀

Marine cast steel flanged check valves

GB/T588-1993

船用法兰青铜截止止回阀

Marine bronze flanged stop check valves

GB/T589-1993

船用法兰青铜止回阀

Marine bronze flanged check valves

GB/T596-1983

船用外螺纹青铜截止止回阀

Marine bronze male thread stop and check valves

GB/T585-1999

船用法兰铸钢截止止回阀

Marine cast steel flanged stop check valves

GB/T1953-1984

船用低压外螺纹青铜截止止回阀

Marine low pressure bronze male threaded stop check valves

JB/T8937-1999

对夹式止回阀

JB/T1736-1991(2005复审)

旋启式止回阀阀瓣密封圈

JB/T1737-1991(2005复审)

旋启式止回阀阀瓣密封圈压板

JB/T53036-1999

止回阀 产品质量分等

NF E29-350-2003

工业用阀.钢制球阀、球状截止阀和止回阀

(Industrial valves - Steel globe and globe stop and check valves.)

NF E29-316-3-2000

供水用阀门.适用性要求和专用检查试验.第3部分:止回阀

(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3 : check valves.)

NF P43-017-1989

建筑物水管阀门.带法兰可调EA止回阀.一般技术规范

(VALVES AND TAPS FOR WATER SUPPLY IN BULDINGS. CONTROLLABLE CHECK VALVES EA,WITH FLANGES. GENERAL TECHNICAL SPECIFICATIONS.)

NF E29-373-1984

工业阀门.止回阀.钢制，单摇板式，带法兰盘,ISO标准压力16，20，25，40，50，100

(Industrial valves. Flanged steel swing check valves. ISO PN A6, ISO PN 20, ISO PN 25, ISO PN 40, ISO PN 50, ISO PN 100.)

NF P43-007-1985

建筑物水管阀门.A级控制非止回阀.一般技术规范

(Valves and taps for water supply in buildings. Controllable check valves class A. General technical specifications.)

NF S62-143-2001

固定的消防系统.气体灭火系统用元件.第13部分:止回阀的要求和试验方法

(Fixed firefighting systems - Components for gas extinguishing systems - Part 13 : requirements and test methods for check valves and non-return valves.)

NF E29-335-2003

石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀

(Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries.)

NF E29-372-2001

工业阀门.铸铁止回阀

(Industrial valves - Cast iron check valves.)

NF E48-423-2001

液压传动.减压阀、顺序阀、卸载阀、节流阀和止回阀.装配面

(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces.)

ANSI/ASSE 1024-1998

双重止回阀型防回流装置

(Dual Check Valve Type Backflow Preventers)

ANSI/FCI 74-1-1990

弹簧加载升降隔膜止回阀

(Valves, Spring Loaded Lift Disc Check)

ANSI/AWWA C 508-2001

2in(50mm)-24in(600mm)NPS水厂设备用摆动止回阀

(Swing-Check Valves for Waterworks Service, 2 in (50 mm) through 24 in (600 mm) NPS)

ANSI/UL 312-1996

消防装置的止回阀

(Check Valves for Fire-Protection Service)

BS EN 13709-2003

工业用阀.钢制球阀、球状截止阀和止回阀

(Industrial valves - Steel globe and globe stop and check valves)

BS EN ISO 15761-2003

石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀

(Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries)

BS EN 12050-4-2001

建筑物和工地用废水提升设备.制造和试验原理.不含粪便和含有粪便的废水用止回阀

(Wastewater lifting plants for buildings and sites - Principles of construction and testing - Non-return valves for faecal-free wastewater and wastewater containing faecal matter)

BS ISO 5781-2000

液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.安装面

(Hydraulic fluid power - Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces)

BS EN 1074-3-2000

供水用阀门.目的要求和适当验收试验的合理性.止回阀

(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves)

EN 12334-2001

工业阀门　铸铁止回阀

Industrial valves - Cast iron check valves

prEN 13327-1998

工业阀门 热塑性材料止回阀

Industrial valves - Check valves of thermoplastics materials

EN 13709-2002

工业阀门 钢球和球止回阀

Industrial valves - Steel globe and globe stop and check valves

EN 12094-13-2001+AC-2002

固定式消防系统　气体灭火系统的部件　第13部分：对止回阀和非回流阀的要求及试验方法

Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves

BS 7438-1991

弹簧加载型钢和铜合金单盘压片止回阀规范

(Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type)

DIN 5594-1994

有轨车辆用压缩空气装置.双止回阀.安装和连接尺寸

(Compressed air equipment for rail vehicles - Double check valves - Installation and companion dimensions)

DIN 86261-1998

造船用炮铜制可闭锁带法兰DN15至500的止回阀

(Non return valves for shipboard use, cutt off type, of gun metall, with flanges, DN 15 to 500)

DIN 86252-1998

造船用铸铁制可闭锁带法兰DN15至500的止回阀

(Non return valves for shipboard use, cutt off type, of cast iron, with flanges, DN 15 to 500)

DIN 85003-5-1997

造船用管件的交货技术条件.第5部分:截止止回阀

(Technical specifications for valves for shipboard use - Part 5: Cutt off type non return valves)

DIN 5593-1994

有轨车辆用压缩空气装置.止回阀.安装和连接尺寸

(Compressed air equipment for rail vehicles - Check valves - Installation and companion dimensions)

DIN 3269-2-1988

地段和建筑物内饮水装置用管件.止回阀PN10.检验

(Valves for domestic drinking water installations; check valves PN 10; tests)

DIN 3269-1-1988

地段和建筑物内饮水装置用管件.止回阀PN10.要求

(Valves for domestic drinking water installations; check valves PN 10; requirements)

DIN 87101-1975

垂直型.公称宽度50-150.公称压力1.自闭式止回阀.符合公称压力的法兰连接

(Non-return flaps (storm valves), self-closing, vertical type, nominal diameter 50 up to 150, nominal pressure 1; mating dimensions for flanges according to nominal pressure 10)

DIN 3441-5-1984

非增塑聚氯乙烯管件.压紧止回阀PN6和PN10.尺寸

(Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions)

DIN 87104-1975

DIN87101止回阀用阀插入件

(Flap Inserts for Non-return Flaps in accordance with DIN 87101)

DIN 3247-1985

无止回阀.带法兰的吸滤器

(Flanged suction strainers without non-return valve)

DIN 87106-1975

DIN87101止回阀用定位装置

(Locking Devices for Non-return Flaps in accordance with DIN 87101)

DIN 3259-1985

带止回阀的法兰吸滤器(脚阀)

(Flanged suction strainers with non-return valve)

DIN 477-4-1982

气瓶阀.轻便储气瓶颈的止回阀

(Compressed gas cylinder valves; swing check valves for camping-cylinders)

DIN 3538-1986

煤气装置管件.止回阀.内螺纹接头

(Valves for gas installations; butterfly valves; female threaded ends)

DIN 3248-1985

无止回阀.带内螺纹连接的吸滤器

(Threaded suction strainers without non-return valve)

DIN 3249-1985

带止回阀.内螺纹连接的吸滤器(脚阀)

(Threaded suction strainers with non-return valve)

DIN EN 1074-3-2000

供水用阀门.适用性要求和专用检查试验.第3部分:止回阀

(Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves; German version EN 1074-3:2000)

DIN 74280-1998

空气制动系统.止回阀

(Air braking systems - Check valve)

DIN EN 13709-2003

工业用阀.钢制球阀、球状截止阀和止回阀

(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002)

DIN 3845-1981

暖气管件.带套管接头的铜合金制PN16止回阀.尺寸.材料

(Valves for heating installations - Copper alloy check valves PN 16 with screwed sockets - Dimensions, materials)

DIN EN 12094-13-2001

固定式消防系统.气体灭火系统用元件.第13部分:止回阀和非止回阀的要求和试验方法

(Fixed firefighting systems - Components for gas extinguishing systems - Part 13: Requirements and test methods for check valves and non-return valves; German version EN 12094-13:2001)

DIN 86066-2002

止回阀用铸钢焊入式弯头.DN50至150,PN10的法兰接合

(Cast steel welding elbows for storm valves - DN 50 to 150, connecting dimensions according to PN 10)

DIN 58362-7-2002

输液.输液器和附件.第7部分:止回阀

(Infusion - Infusion equipment and accessories - Part 7: Check valves)

DIN EN ISO 15761-2003

石油和天然气工业用规格为DN100及更小的钢闸阀、球阀和止回阀

(Steel gate, glob and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries (ISO 15761:2002); German version EN ISO 15761:2002 (German and English text))

DIN 87107-1975

DIN87101止回阀用扁垫圈

(Gaskets for Non-return Flaps in accordance with DIN 87101)

DIN 87103-1975

DIN87101止回阀的罩盖

(Covers for Non-return Flaps in accordance with DIN 87101)

DIN 87102-1975

DIN87101止回阀的外壳

(Casings for Non-return Flaps in accordance with DIN 87101)

DIN 87105-1975

DIN87101止回阀用带凸肩的闭锁螺钉

(Screw Plugs with Cylindrical Extension for Non-return Flaps in accordance with DIN 87101)

DL/T923-2005

火力发电用止回阀技术条件

GB/T1855-1993

船用法兰铸铁单排吸入截止止回阀箱

Marine flanged cast iron single arrangement suctio stop check box valve

GB/T1853-1994

船用法兰铸钢舷侧截止止回阀

Marine flanged cast steel over board stop check valve

UL 1469-1995

回流专用止回阀的阀身强度和液压损失率检验

(Strength of body and hydraulic pressure loss testing of backflow special check valves )

JIS F7372-1996

造船.铸铁5K回转式止回阀

(Shipbuilding -- Cast iron 5K swing check valves)

JIS F3058-1996

铸钢立式波浪止回阀

(CAST STEEL VERTICAL STORM VALVES)

JIS F7356-1996

造船.青铜5K升降止回阀

(Shipbuilding -- Bronze 5K lift check valves)

JIS F7373-1996

造船.铸铁10K回转式止回阀

(Shipbuilding -- Cast iron 10K swing check valves)

JIS F7371-1996

造船.青铜5K回转止回阀

(Shipbuilding -- Bronze 5K swing check valves)

JIS F7495-2000

造船.球墨铸铁10K旋压止回阀

(Shipbuilding -- Spheroidal graphite iron (ductile iron) 10K screw-down check globe valves)

JIS F3060-1996

铸钢旋压立式波浪止回阀

(CAST STEEL SCREWDOWN VERTICAL STORM VALVES)

JIS B8664-2001

液压动力.压力控制阀(不包括减压阀)、顺序活门、释荷阀、节流阀和止回阀.安装表面

(Hydraulic fluid power -- Pressure-control valves (excluding pressure-relief valves), sequence valves, unloading valves, throttle valves and check valves -- Mounting surfaces)

ISO 9952-1993

农业灌溉设备.止回阀

(Agricultural irrigation equipment; check valves)

ISO 15761-2002

石油和天然气工业用尺寸为DN 100及更小的钢闸阀、球阀和止回阀

(Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries)

ISO 15500-3-2001

道路车辆.压缩天然气(CNG)燃料系统元部件.第3部分:止回阀

(Road vehicles - Compressed natural gas (CNG) fuel system components - Part 3: Check valve)

ISO 5781-2000

液压传动.减压阀、顺序阀、卸荷阀、节流阀和止回阀.装配面

(Hydraulic fluid power - Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves - Mounting surfaces)

SY/T5215-2005

钻具止回阀